Copyright © 2010 A.E.Harris & Co

Web Site by BellComp Web Systems

Hot Melt Glue Applicators

3M Jet - melt Polygun LT

Low Melt Applicator

Use of a palm trigger reduces operator fatigue where longer beads are required.

Adhesive throughput 36 gms/min. Weight: 370 gms. Output 150 watts. 30 gms Quadrack Low Melt adhesive stick gives 7.1 metre bead. Adhesive temperature = 130°C

Available as

Jet-melt TC QuadrackTM Applicator

for applying Hot Melt adhesives at  210°C .

3M Polygun 2

This air powered gun has the highest output of the range. Used where long beads or large volumes of adhesive are required, a high capacity adhesive slug magazine feeder is available. Additionally the gun can be semi-automated when bench mounted and used in conjunction with a foot pedal.

Adhesive throughput 60 gms/min. Weight: 1500 gms. Output 500 watts. Operates at 80 psi (5.5 bars). Uses 37 gm adhesive slugs, this gives a 9,8 metre bead.

(not suitable for Low Melt adhesives)

The 3M Jet-melt TC gun is recommended for intricate work such as dot and spot applications often found in the electronics industry.

Adhesive throughput 36 gms/min. Weight: 330 gms. Output 150 watts. Various nozzles available, easy reload. 8 gm mini stick gives 2, 1 metre bead.

(not suitable for Low Melt adhesives).